Which trees will a trimmer find in Midlothian yards?
Mostly the ones the prairie and the city's planting rules favor. The USDA describes live oak and hackberry mottes as native to the northern Blackland, with cedar elm and eastern red cedar plentiful in places (checked Nov 15, 2026). Midlothian's zoning code recommends live oak, bur oak, cedar elm, Texas ash, bald cypress, pecan, Shumard red oak and Texas redbud for required landscape trees (Sec. 4.5404, as amended by Ord. 2017-75; checked Nov 15, 2026).
| Tree | Points to settle before trimming |
|---|---|
| Live oak | An oak, so the February-to-June caution below applies. Its roots interconnect with neighboring live oaks, which is how oak wilt moves between them. |
| Shumard and other red oaks | Also oaks; Texas A&M Forest Service says red oaks can die within as little as a month of oak wilt infection, and infected red oaks are where the spore mats form. |
| Cedar elm | Not an oak, so the oak season advice doesn't apply. Jobs include raising limbs over patios and walks and thinning a crowded crown. |
| Pecan | Big limbs over roofs and driveways; dead wood after drought or storms. |
| Ash | Emerald ash borer is confirmed in Ellis County. Look for dying branches at the top before paying to shape the tree (see below). |
When is the safest time to prune an oak here?
Outside February through June. That's Texas A&M Forest Service guidance for oaks statewide: avoid pruning or making new wounds on oak trees from February to June, because sap-feeding beetles carry oak wilt spores from fungal mats on infected red oaks to fresh wounds (Forest Service release of May 19, 2025, and oak wilt FAQ; checked Nov 15, 2026).
The disease is confirmed in 76 Texas counties. Ellis County isn't on the Forest Service's TexasOakWilt.org county maps, which show only counties with more than twenty recorded oak wilt mortality centers, and that site notes oak wilt may exist outside them (checked Nov 15, 2026). So read the timing as statewide advice rather than a sign the disease is in your neighborhood. The stakes are still worth knowing: the Forest Service says red oaks can die within as little as one month of infection, and in live oaks the fungus moves through connected roots, about 75 feet a year on average (checked Nov 15, 2026).
If a storm tears an oak limb in spring, the broken stub is already a wound. Ask the contractor how they'd handle storm damage on an oak during those months.
What should happen to hail-torn and storm-broken limbs?
Get them looked at, and get hanging or cracked limbs down before they fall on their own. Broken wood also matters for the tree's health. A Texas AgriLife Extension fact sheet on hypoxylon canker, a fungus that can attack any type of oak, lists hail damage, ice storms, heat, drought, lightning and flooding among the stresses that let it take hold in weakened trees, and says advanced cankers can make a tree a danger to life and property (PLPA-114, May 22, 2009; checked Nov 15, 2026).
The hail and storm damage page lists Ellis County's tornadoes and FEMA declarations on record and the claim steps the Texas Department of Insurance recommends.
What clearance does Oncor keep around its lines?
Oncor publishes its clearances (Vegetation Management page and Tree Pruning FAQ; checked Nov 15, 2026):
| Line | Clearance Oncor keeps | Who trims |
|---|---|---|
| High-voltage primary distribution lines (pole to pole) | At least 10 feet, including overhang | Oncor only |
| Open-wire secondaries | At least 7 feet | Oncor |
| Neutrals and wrapped secondaries | 3 to 5 feet | Oncor |
| Service line from the pole to your meter | No figure given | The owner hires a tree trimmer; Oncor can temporarily lower the line for a nominal charge |
Oncor tells customers never to try trimming trees along the pole-to-pole lines themselves. State law backs that with a six-foot rule: Texas Health and Safety Code Chapter 752 bars work in which a person moves or is placed within six feet of a high-voltage line unless the operator is notified at least 48 hours ahead and safety arrangements are made (checked Nov 15, 2026). If your power comes from HILCO Electric Cooperative or Navarro County Electric Cooperative instead, call them about lines near your tree: HILCO at 800-338-6425, Navarro County at 903-874-7411.
What about limbs over a street corner?
Midlothian's nonresidential landscaping standards let trees stand in the visibility triangles at street and alley intersections only if they're trimmed so no limbs or foliage reach into the band between 3 and 6 feet above grade (Sec. 4.5403, eCode360; checked Nov 15, 2026); those standards are written for new nonresidential and multifamily construction. The residential section says trees may not be planted in intersection sight triangles, utility easements or rights-of-way, within 10 feet of a fire hydrant, or where the mature canopy will interfere with overhead lines (Sec. 3.5401(b), eCode360) (both checked Nov 15, 2026). Either way, if you're on a corner lot and a low limb blocks the view of the cross street, that's a reason to raise it.
Can you cut a neighbor's branches that hang into your yard?
Up to the property line, generally yes. The Texas State Law Library says Texas has no statute on overhanging branches, but courts have allowed owners to trim branches and roots that cross the line. You can't trim beyond the line, injure or kill the tree, or go onto the neighbor's property without permission unless the branches are an imminent threat, and a poor job could get you sued for damages (updated Mar 8, 2024; checked Nov 15, 2026). It's worth telling the neighbor before the crew arrives.
Trimming prices by tree height
| Tree height | Typical price per tree |
|---|---|
| 30 ft or shorter | $250-$700 |
| 30-60 ft | $600-$1,200 |
| Taller than 60 ft | $1,000-$2,500 and up |
HomeGuide's national average is $650, with a minimum around $80. None of that is a Midlothian price; the contractor prices your trees after seeing them. If the trimming might turn into a removal, the removal cost page has those ranges.
Ellis County trimming answers
Is it worth trimming an ash now that the borer is here?
Check its health first. Texas A&M Forest Service lists dying branches near the top, leafy sprouts on the trunk, bark splits, heavy woodpecker activity and D-shaped exit holes as signs of emerald ash borer, and recommends systemic insecticide treatment (emamectin benzoate) where the borer is present, with injections protecting for 2 to 3 years (checked Nov 15, 2026). An ash that's already dying is a removal question; see dead tree removal.
Can trimmed limbs go out to the curb?
Inside Midlothian, yes, within Waste Connections' limits: tied bundles of branches 3 feet or shorter and no thicker than 6 inches, each under 35 pounds, up to 2 cubic yards per pickup day, set out by 7 a.m. (City of Midlothian; checked Nov 15, 2026). Burning them is another matter; see brush and burning.
Does the city need to approve trimming?
Nothing this site read in Midlothian's zoning code requires approval to trim a tree at an existing home. The nearest thing is the corner visibility rule above, which sits in the nonresidential standards.
To have a trimmer look at your trees, call (469) 537-4905 or use the request form. The request goes to one independent contractor in the Midlothian and Ellis County area, who looks at the trees, prices the trimming and does it.
